Upcoming Webinars Archived Webinars Training Vitals Host A Webinar About Get Updates Contact
Tuesday, July 15th, 2008, 1:00 – 2:30pm EDT
Microturbine Applications for the Oil & Gas Industries
SPEAKERS FOR THIS EVENT:
  • Lee Richards, Director of Sales, Oil & Gas,  Capstone Turbine Corporation Learn More
  • Bryan Hensley, Vice President of Sales, Pumps & Service Learn More
  • Microturbine Applications for the Oil & Gas Industries

    An increasing number of Oil & Gas companies are utilizing microturbine technology in order to:

     

    ·         Improve Reliability

    ·         Get off the Grid

    ·         Reduce Emissions

    ·         Reduce cost of Maintenance

    ·         Become more Efficient

     

    This webinar will provide insight into how microturbine technology is helping Oil & Gas companies face the unique set of challenges facing their industry.

     

    This event is presented by global industry leader Capstone Turbines, a company whose client base includes Pemex, Chevron, BP, Petronas, Petrobas, TransCanada Pipelines, Dominion Gas Transmission and Gazprom.

     

    With thousands of units sold and tens of millions of operating hours under its belt, Capstone Turbine has become the standard for customers who require power generation with low emissions, low operating costs, and high availability/reliability. The added benefits of CHP further improves the value of Capstone units increasing energy efficiency to a greater degree.

     

    Capstone Turbines can provide power generation for remote sites where grid power is unavailable. Typical examples include offshore oil and gas production platforms as well as remote gas pipeline stations where installation of grid power is not feasible. Fuel for these applications can be sourced from pipeline or production gas including fuels with H2S components or gas which is typically vented or flared. Liquids such as diesel, bio diesel, and ethanol can also be used a suitable fuels.

     

    The exhaust from these turbine generators are lowest of any generator available with standard NOx emissions below 9ppm. Further, the high volume of exhaust can be combined with heat recovery and used in process that require hot water, glycol, or oil, as well as direct heat to processes such as heater treaters.

     

    Maintenance costs, reliability and availability of the Capstone Turbines are exceptionally better than competing technologies. By combining the technology of air bearings and the concept of a single moving component, opportunities for failures and requirements of maintenance are minimized. Maintenance costs are less than 10% of the cost of equivalent size reciprocating products with availability over 99% and mean time between failures exceeding 15,000 operating hours.

     

    THIS PROGRAM IS INTENDED FOR:

    Senior level executives in the oil & gas industries.

    ABOUT OUR SPEAKERS:

    Lee Richards, Director of Sales, Oil & Gas,  Capstone Turbine Corporation 

    Lee Richards has spent more than 15 years in the oil and gas industries with a wide range of positions including field service, engineering, manufacturing, and sales.

     

    In July of 2007 Lee joined Capstone Turbine as the Director of Oil and Gas Sales responsible for the market growth and applications of Capstone products in the oil and gas industries.  Lee drives the package application to ensure that Capstone products are designed suitably for the harsh market environments, participates in industry events to promote Capstone products within specific market segments, and ensures that the channels to market including aftermarket services meet the demands of both the on-shore and off-shore O&G markets.

     

    His experience includes positions with both Cooper Energy Services and Solar Turbines.  Lee has a degree in mechanical engineering technology as well as an MBA from the University of Houston.

     

    Bryan Hensley, Vice President of Sales, Pumps & Service 

    Pumps & Service, a subsidiary of Henry Production Inc., is a service company that was established in 1978 to support oilfield equipment with drivers, controls, packaging and service. Our fabrication facility has packaged air and natural gas compressors, salt water disposal facilities, water transfer units and hydraulic power units; we are a complete packaging facility.

    In December 2000, Pumps & Service installed a Multi-Pac of C-30 Capstone Micro Turbines as the only source of power for a remote Salt Water Disposal in the Carson National Forest of Northwestern New Mexico.  We now have over 100 units in applications ranging from artificial lift, primary power, back-up power and waste heat recovery. 

    Bryan Hensley is the Vice President for Sales of Pumps & Service and is located at their Farmington, New Mexico facility.  Bryan has been with Pumps & Service since March 27, 1995 and has more than 26 years in the oil and gas industry.

     

     

    ABOUT OUR SPONSORING PARTNER:

    Capstone Turbine Corporation® is the world’s leading producer of low-emission air bearing turbine systems, and was first to market with commercially viable air bearing turbine technology. The company has shipped thousands of Capstone turbines to customers worldwide. These award-winning systems have logged millions of documented runtime operating hours.

     

    Capstone is a member of the U.S. Environmental Protection Agency’s Combined Heat and Power Partnership which is committed to improving the efficiency of the nation’s energy infrastructure and reducing emissions of pollutants and greenhouse gases.

     

    A UL-Certified ISO 9001:2000 and 14001:2004 certified company, Capstone is headquartered in Chatsworth, California and has offices in New York, Mexico City, Milan, Bath, Shanghai and Tokyo.

     

    To learn more about Capstone Turbine: http://www.capstoneturbine.com/

     
    Copyright © 2016-2017 Honeycomb Worldwide Inc.